English
The Fluke 5215A Precision Power Amplifier is an ac coupled programmable inverting amplifier with a fixed gain of 100. Output level is specified to 1100V at up to 200 mA, with a typical upper limit of 1200V before automatically tripping into standby mode.
The Fluke 5215A Precision Power Amplifier is an ac coupled programmable inverting amplifier with a fixed gain of 100. Output level is specified to 1100V at up to 200 mA, with a typical upper limit of 1200V before automatically tripping into standby mode.The 5215A includes automatic-overload sensing and recovery. Upon sensing an excessive slew rate or frequency of the input signal, or a momentary output overload, output is returned to zero within 2 microseconds and held there for 6 milliseconds, or until the fault is corrected. When steady overload, shorted output, or excessive input drive level is detected, the 5215A trips and locks into standby mode and displays a fault indicator.
The 8447F is the 8447D Preamplifier and 8447E Power Amplifier combined into a single package. The 8447F is capable of providing gain and power to overcome systematic RF losses, drive high-power devices and improve measurement system performance. The Agilent 8447F can be used to increase low-level sweep speed and increase dynamic range measurements when used with a network analyzer.
The DSi-4000 2-Channel Amplifier from Crown Audio offers outstanding quality and performance in a rack-mountable steel design, ideal for cinema use and TXH approved.
The Model 428-Man Programmable Current Amplifier converts fast, small currents to a voltage, which can be easily digitized or displayed by an oscilloscope, waveform analyzer, or data acquisition system.
If you have any purchasing or recycling needs for the above equipment, feel free to contact us. We are dedicated to providing you with the best service!
