English
The Multi-Product Calibrator Fluke 5500A is a revolutionary product that addresses a wide cross-section of your electrical calibration work load. It sources direct voltage and current, alternating voltage and current with multiple waveforms and harmonics, two simultaneous voltage outputs or voltage and current, and simulates power with phase control, resistance, capacitance, thermocouples, and RTDs. The Oscilloscope Calibration options of the 5500A provide level sine wave, fast edge, time mark, and amplitude signals for calibration of oscilloscopes up to 600 MHz.
The Multi-Product Calibrator Fluke 5500A is a revolutionary product that addresses a wide cross-section of your electrical calibration work load. It sources direct voltage and current, alternating voltage and current with multiple waveforms and harmonics, two simultaneous voltage outputs or voltage and current, and simulates power with phase control, resistance, capacitance, thermocouples, and RTDs. The Oscilloscope Calibration options of the 5500A provide level sine wave, fast edge, time mark, and amplitude signals for calibration of oscilloscopes up to 600 MHz.
Specifications:
| Direct Volts | 0-±1020V |
| Direct Current | 0-±20.5A |
| Alternating Volts | 1 mV - 1020V 10 Hz - 500 kHz |
| Volt*Hertz | 1000V@10 kHz/33V@100 kHz |
| Alternating Current | 29 µA - 20.5A 10 Hz - 30 kHz |
| Waveforms | Sine, square, triangle, truncated sine |
| Resistance | 0 - 1.1 GΩ |
| Capacitance | 190 pF - 110 mF |
| Power (phantom loads) | 20.9 kW |
| Phase Control | 0.01° |
| Thermocouple (source and measure temperature) | B, C, E, J, K L N R, S, T, U 10 µV/°C 1 mV/°C 1 mV/%RH |
| RTD (source temperature) | Pt 385-100Ω, Pt 3926- 100Ω, Pt 3916-100Ω, Pt 385- 200Ω, Pt 385-500Ω, Pt 385 1000Ω, PtNi 385-120Ω, (Ni120), Cu 427 10Ω |
| Humidity Measurement | Displayed in %RH |
| Interfaces | RS 232, IEEE 488 |
The 5080A Multi-Product Calibrator calibrates your analog workload accurately and reliably, thanks to its high voltage and current compliance. With maximum burden up to 800 mA for ac/dc voltage, and voltage up to 50 V for ac/dc current, 5080A calibrators can drive a wide range of analog meters.
The Fluke Calibration 7526A Precision Process Calibrator offers the best balance of economy and accuracy for benchtop calibration of temperature and pressure process instrumentation. Easily calibrate RTD and thermocouple readouts, pressure gauges, temperature transmitters, digital process simulators, data loggers, multimeters and more.
The 5522A Multi-Product Calibrator addresses a wide calibration workload and comes with internal and external protection features that protect it against damage and make it easier to transport for on-site or mobile calibration. It is the ideal calibrator for metrology professionals who need to calibrate many different types of electronic equipment and want a transportable instrument that offers them a high return on investment.
The Fluke 6100A Power Quality Calibrator is an accurate, comprehensive and flexible power signal source that sets a new standard for accuracy in power standards.
The Fluke 9640A Reference Source can help you simplify the RF calibration process. The 9640A can help calibrate a broad range of RF test equipment: Spectrum analyzers, Modulation meters and analyzers, RF power meters and sensors, Measurement receivers, Frequency counters, Attenuators, and more.
The 760A Meter Calibrator is a complete, solid-state calibration system for AC and DC voltmeters, ammeters, ohmmeters, and multimeters. Safety inter-locks are provided to protect both operator and instrument.
If you have any purchasing or recycling needs for the above equipment, feel free to contact us. We are dedicated to providing you with the best service!
